Quick Reference Guide

78 RACADM Subcommands
"1.0"
"ON"
gettracelog
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the diagnostic trace log for the CMC. The default output display
shows the record number, timestamp, source, and description. The
timestamp begins at midnight, January 1 and increases until the system
boots. During system boot, the timestamp displays as <system boot>.
After the system boots, the system’s timestamp is used.
Usage
From remote RACADM:
racadm gettracelog [-i]
racadm gettracelog [-s <start record>] [-c <count>]
[-m]
From local RACADM:
racadm gettracelog [-s <start record>] [-c <count>] [-
-more]
racadm gettracelog [-i]
Options
Table 2-28. gettracelog Subcommand Options
Option Description
(none) Displays the CMC trace log.
-s
Specifies the starting record to display.
-c
Specifies the number of records to display.
-i
Displays the number of entries in the CMC trace log.