Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 3.0
51525354555657585960
60 RACADM Subcommands
Current IPv6 Gateway = fe80::21c:23ff:fe77:6215
Speed = Autonegotiate
Duplex = Autonegotiate
VLAN Enable = 0
VLAN ID = 1
VLAN priority = 0
For iDRAC that supports IPv6:
• racadm getniccfg -m server-1
IPv4 Enabled = 1
DHCP Enabled = 1
IP Address = 192.168.7.68
Subnet Mask = 255.255.255.0
Gateway = 192.168.7.1
IPv6 Enabled = 1
Autoconfiguration Enabled = 1
Link local Address =
fe80::222:19ff:fed2:1d67/64
IPv6 Address 1 =
2009:123::fb2f:9b4a:dce8:b802/128
IPv6 Address 2 =
fd88:1::222:19ff:fed2:1d67/64
IPv6 Address 3 =
fd88:2::222:19ff:fed2:1d67/64
IPv6 Gateway =
fe80::21c:23ff:fe77:6215
VLAN Enable = 0
VLAN ID = 4
VLAN priority = 3
NOTE: VLAN properties are displayed even when the VLAN is disabled.
NOTE: IPv6 information is displayed only if the iDRAC supports IPv6.
For iDRAC that does not support IPv6:
• racadm getniccfg -m server-1
DHCP Enabled = 1
IP Address = 192.168.7.100
Subnet Mask = 255.255.255.0
Gateway = 192.168.7.1