Quick Reference Guide

RACADM Subcommands 39
• Query the current status of all targets that can be updated in the chassis.
racadm fwupdate -s -m all
• Query the current status of the firmware update process for servers 1 and
3.
racadm fwupdate -s -m server-1 -m server-3
• Cancel a firmware update of the active CMC in progress.
racadm fwupdate -c -m cmc-active
• Upload a firmware image from the client and start the firmware update.
racadm fwupdate -p -u -d firmimg.cmc
NOTE: The fwupdate command generates an error when used on the extension
slot of a multi-slot server.
getassettag
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the asset tag for the chassis.
Usage
racadm getassettag [-m <module>]
Options
Table 2-12. getassettag Subcommand Options
Option Description
-m <module> Specifies the module whose asset tag you want to view.
Legal value: chassis
Because there is only one legal value, you can obtain the same
output if you do not include this option.
NOTE: <assettag> is a maximum of 64 non-extended ASCII
characters.