Quick Reference Guide

26 RACADM Subcommands
Property Groups
NOTE: Appendix B, "CMC Property Database Group and Object Definitions" on
page 117, provides details about the property groups. See also "getconfig" on
page 40.
NOTE: Configuration objects may be different between the groups accessed with
and without the -m option.
Table 2-5 lists the property groups that can be specified with the -g option.
.
<
value> Displays the value that you want to set for the specified object.
While specifying <value>, see "Guidelines to Quote Strings
Containing Special Characters When Using RACADM
Commands" on page 17.
-f
<filename> Specifies the file name to use as a configuration source. Valid
only through remote RACADM.
-c Specifies to perform validation but do not configure. Valid only
through remote RACADM.
-p Removes passwords from the configuration file. Valid only
through remote RACADM.
Table 2-5. RACADM Property Groups
Group Description
cfgLanNetworking Configures network related properties
cfgIPv6LanNetworking Configures IPv6-specific network related properties
cfgRemoteHosts Enables/disables and configures firmware update, SMTP
email alerting, and NTP servers
cfgUserAdmin Configures CMC users
cfgEmailAlert Configures CMC e-mail alerting
cfgSessionManagement Sets the maximum number of remote sessions allowed to
connect to CMC at a time
cfgSerial Enables/disables and configures serial console
cfgNetTuning Configures CMC network tuning
Table 2-4. config Subcommand Options
(continued)
Option Description