Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 3.0
11121314151617181920
20 RACADM Subcommands
arp
NOTE: To use this subcommand you must have Administrator privilege.
Description
Displays the Address Resolution Protocol (ARP) table. This table stores the
mapping of IP numbers to MAC addresses of the NICs in the chassis.
Example
• racadm arp
chassisaction
NOTE: To use this subcommand, you must have Chassis Control Administrator
privilege.
Description
Executes a power action on the chassis, iKVM, or a server.
Usage
racadm chassisaction [-m <module>] <action>
Address HWtype HWaddress Flags Mask Iface
143.166.152.3 ether 00:07:84:A7:CE:BC C eth0
143.166.152.2 ether 00:07:84:7B:9F:FC C eth0
143.166.152.1 ether 00:00:0C:07:AC:0A C eth0
143.166.152.113 ether 00:15:C5:48:9C:1D C eth0