Quick Reference Guide

CMC Property Database Group and Object Definitions 165
# cfgChassisInPowerServerAllocation
Read only. Indicates (in watts) the cumulative power allocated to servers.
There is no default as this parameter is very specific to the particular
customer configuration.
# cfgChassisInfrastructureInPowerAllocation
Read only. Indicates the estimated cumulative DC output power
consumption (in watts), determined from a field replaceable unit (FRU) on
the hardware modules in the chassis.
# cfgChassisTotalInPowerAvailable
Read only. Indicates the amount of power (in watts) available for use by the
chassis.
# cfgChassisStandbyInPowerCapacity
Read only. Indicates the amount of power (in watts) available for powering
up any hardware modules that are either added to the chassis or powered up
(if they are already present in the chassis).
# cfgChassisPowerClear
Write only. To reset cfgChassisMinPower and
cfgChassisMaxPowerCapacity, set this object to 1.
# cfgChassisPowerClearTimestamp
Read only. Time stamp when cfgChassisMinPower and
cfgChassisMaxPowerCapacity were reset.
cfgChassisPowerButtonEnable
Indicates if the chassis power button is enabled or disabled.
• Va lu e s: 0 (disabled), 1 (enabled)
# cfgSystemEnergyConsumptionClear
Write only. To reset energy statistics, set this value to 1.