Quick Reference Guide

162 CMC Property Database Group and Object Definitions
# cfgChassisRedundantState
Read only. Enables or disables power redundancy for the chassis.
• Val ues : 0 (none), 1 (full)
cfgChassisPowerCap
Indicates the maximum power consumption limit (in watts) for the entire
chassis. The command generates an error if server throttling is necessary to
achieve the power goal based on the value for this setting.
• Configuration range: 2715–11637 watts
•
Default: 11637 watts
cfgChassisPowerCapF
Indicates the maximum power consumption limit (in watts) for the entire
chassis. Use cfgChassisPowerCapF when power consumption is to be
changed regardless of whether server throttling is required. This command
generates an error if the value for this setting is lower than the minimum
power required for the chassis configuration.
• Configuration range: 2715–11637 watts
•
Default: 11637 watts
cfgChassisPowerCapBTU
Indicates the maximum power consumption limit (in BTU/hr) for the entire
chassis. The command generates an error if server throttling is necessary to
achieve the power goal based on the value for this setting.
• Configuration range: 9264 - 39707 BTU/hr
•
Default: 39707 BTU/hr