Quick Reference Guide
132 CMC Property Database Group and Object Definitions
cfgRhostsNtpServer3
Specifies the third of three possible NTP servers.
Legal value: A string representing a valid NTP server. For example,
ntp3.ntp.net. At least one NTP server must be specified and duplicate entries
are not allowed.
Default: [null]
cfgRhostsNtpMaxDist
Specifies the NTP maximum distance parameter used to aid in NTP
configuration.
Legal value: 1
–
128
Default: 16
cfgRhostsSyslogEnable
Enables or disables feature to allow the RAC and SEL logs to be written to up
to three remote syslog servers.
•
Configuration options:
1 (enabled), 0 (disabled)
•
Default:
0
cfgRhostsSyslogPort
Specifies the network port number to use for writing the RAC and SEL logs
to a remote syslog server. This setting takes effect only if the
cfgRhostsSyslogEnable parameter is set to 1 (enabled).
•
Configuration range:
1 – 65535
•
Default:
514
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 123,
161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.