Quick Reference Guide

RACADM Subcommands 109
Options
NOTE: If no options are specified, the default option is –g. That is, a CSR is
generated and stored on the CMC’s local file system.
Example
• racadm sslcsrgen -s
CSR generation in progress.
• racadm sslcsrgen -g -f c:\csr\csrtest.cer
The csr was generated successfully.
NOTE: For more information on managing SSL certificates, see the “Securing CMC
Communications Using SSL and Digital Certificates” section in the Dell Chassis
Management Controller User Guide
.
sslresetcfg
NOTE: To use this subcommand, you must have Chassis Configuration
Administrator privilege.
Description
Regenerates the self-signed certificate used by the CMC Web GUI. The
certificate takes effect 30 seconds after the command is entered.
Table 2-46. sslcsrgen Subcommand Options
Option Description
-g
Generates a new CSR. The -g option cannot be used with the -s
option.
-s
Returns the status of a CSR generation process:
• CSR was generated successfully.
•CSR does not exist.
• CSR generation in progress.
The -s option cannot be used with the -g option.
-f <filename> Specifies the filename where the CSR will be downloaded. Can be
used without the –g option. In this case, no new CSR is generated
and the existing CSR is downloaded.