Quick Reference Guide

RACADM Subcommands 101
Example
The setractime subcommand supports dates ranging from 1/1/1970 00:00:00
through 12/31/2030 23:59:59. To set the date to October 24, 2007 at 3:02:30
PM PST:
racadm setractime -l 20071024150230 -z PST8PDT
The time was set successfully.
setslotname
NOTE: To use this subcommand, you must have Administrator privilege.
NOTE: See the "Editing Slot Names" section in the Dell Chassis Management
Controller User Guide
for rules for selecting slot names.
Description
Displays the name and hostname (if available) of all 16 slots, or of a specified
slot (indicated by the slot number) in the chassis. Optionally, this command
can be used to set whether the slot name or hostname is displayed in the
CMC User Interface or with the getslotname -i <slot ID>
command. If the hostname is not available, the static slot name is used.
-l Sets the local date and time in the string yyyymmddhhmmss where:
• yyyy is a the year
•
mm is the month
•
dd is the day
•
hh is the hour
•
mm is the minute
•
ss is the second
NOTE: Setting the time using the -l and -z options is recommended. This
command format allows the CMC to fully support local time zones,
including the ability to automatically adjust the CMC time to the local
Daylight Savings Time.
Table 2-39. setractime Subcommand Options
Option Description