CLI Guide

netstat
Description Displays the routing table and the current connections.
To use this subcommand, you must have the Execute Diagnostic
Commands privilege.
Synopsis
racadm netstat
Input
racadm netstat
Output
Kernel IPv6 routing table
Destination
Next Hop Flags
Metric Ref Use Iface
::
1/128 ::
U
0 30 1 lo
fe80::200:ff:fe00:d01/128 ::
U
0 0 1 lo
fe80::/64 ::
U
256 0 0 eth1
ff00::/8 ::
U
256 0 0 eth1
Kernel IP routing table
Destination Gateway
Genmask Flags MSS Window irtt Iface
192.168.0.1 0.0.0.0
255.255.255.0 U 0 0 0 bond0
0.0.0.0 192.168.0.1
0.0.0.0 UG 0 0 0 bond0
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address
Foreign Address State
tcp 0 0 127.0.0.1:8195
127.0.0.1:52887 ESTABLISHED
tcp 0 0 127.0.0.1:199
127.0.0.1:52174 ESTABLISHED
tcp 0 0 127.0.0.1:52175
127.0.0.1:199 ESTABLISHED
tcp 0 0 127.0.0.1:199
127.0.0.1:52175 ESTABLISHED
tcp 0 0 192.168.0.1:22
192.168.0.1:45106 ESTABLISHED
tcp 0 0 127.0.0.1:52174
127.0.0.1:199 ESTABLISHED
tcp 0 0 127.0.0.1:52887
127.0.0.1:8195 ESTABLISHED
ping
Description
Veries that the destination IP4address is reachable from iDRAC with the current routing-table
contents. A destination IP4address is required. An ICMP echo packet is sent to the destination IP
address based on the current routing-table contents.
66 RACADM Subcommand Details