CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.0 for Dell PowerEdge VRTX

Physical Disk 0:0:2 AS09 Disk.Bay.

2:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:3 AS09 Disk.Bay.

3:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:4 AS09 Disk.Bay.

4:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:5 AS09 Disk.Bay.

5:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:6 AS09 Disk.Bay.

6:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:7 AS09 Disk.Bay.

7:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:8 AS09 Disk.Bay.

8:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:9 AS09 Disk.Bay.

9:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

• -b - Displays the server's current BIOS version (default is iDRAC version).

• -c - Displays the server's current CPLD version.

• -l - Displays the rmware versions Lifecycle Controller components.

• -f <lter> - Filters the components. Must be used with -1 and be one of the following values:

• bios: BIOS

• idrac: iDRAC

• usc: Unied Server Congurator (Lifecycle Controller)

• diag: 32-bit Diagnostics

• drivers: OS Driver Package

• nic-x: Network Interface card. See -l output for possible values of x.

• raid-x: RIAD Controller. See -l output for possible values of x.

• -m <module> - Species the module or device for which you must retrieve the version information.

<module> is one of the following:

• server-n, where n = 1 to 4. For example, cmc-2.

• switch-n, where n = 1

• CMC-n, where n = 1 or 2

• mainboard

• perc

• expander

• hdd

• perc-fqdd, where fqdd is FQDD of the PERC.

• expander-fqdd, where fqdd is FQDD of the Storage Expander.

• hdd-fqdd, where fqdd is FQDD of the HDD.

Example

• Retrieve the version for a server 4

racadm getversion -m server-4

• Retrieve the Lifecycle Controller component versions for servers 1 and 3:

racadm getversion -l -m server-1 -m server-3

• Retrieve the Lifecycle Controller BIOS versions for servers 1 and 3:

racadm getversion -l -m server-1 -m server-3 -f bios

• Retrieve the version for all modules:

racadm getversion

• Retrieve the iDRAC version in all the servers that are attached to the chassis:

racadm getversion -f idrac

RACADM Subcommand Details 61