CLI Guide

PS-1 Present Online
OK N/A N/A
PS-2 Present Online
OK N/A N/A
PS-3 Not Present N/A N/
A N/A N/A
PS-4 Not Present N/A N/
A N/A N/A
CMC-1 Present Primary
OK N/A N/A
CMC-2 Present Standby
OK N/A N/A
Switch-1 Present ON
OK N/A N/A
Server-1 Not Present N/A
N/A N/A N/A
Server-2 Not Present N/A N/
A N/A N/A
Server-3 Present OFF
OK DJ22H82 DJ22H82
Server-4 Not Present N/A N/
A N/A N/A
DVD Present ON
OK N/A N/A
IO-Cable Present ON
OK 3BPV622 N/A
FPC-Cable Present ON
OK 3BPV622 N/A
getniccfg
Table 17. getniccfg
Description Displays the current NIC settings.
Synopsis
racadm getniccfg
Input
racadm getniccfg
racadm getniccfg –m <module>
where –m must be one of the following values:
•
chassis
: default state if -m is not specied
•
server-n
: where n = 1 to 4
• switch-n
: where n = 1
Example
racadm getniccfg
NIC Enabled = 1
IPv4 Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.94.225.212
Current Subnet Mask = 255.255.255.128
48 RACADM Subcommand Details