Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.0 for Dell PowerEdge VRTX
41424344454647484950
• racadm getmacaddress -c all
Input
• -m <module> — Species the module whose MAC address you want to view.
<module> may be one of the following:
server-n, where n=1–4
switch-n, where n=1
• -t — Displays the iSCSI MAC addresses for all servers or the specied server if used with -m option.
• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and must be used
with -m option.
• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine cards. When
FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN address is displayed.
• -c — Displays the ethernet, iSCSI, MAC/WWN, assignment type, and partition status of all LOMs or
mezzanine cards. Valid values for the -c option are:
• IO-Identity — Displays the user-dened MAC/WWN addresses.
• FlexAddress — Displays the chassis-assigned WWN/MAC addresses.
• Factory — Displays the MAC/WWN addresses for all LOMs or mezzanine cards.
• all — Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
Example
• Displays the NDC or LOM MAC address.
racadm getmacaddress
• Display iSCSI MAC addresses for all servers.
racadm getmacaddress -t iscsi
• Display iSCSI MAC for server-1.
racadm getmacaddress -m server-1 -t iscsi
• Display extra iSCSI MACs for server-1 (if available).
racadm getmacaddress -m server-1 -t iscsi -x
• Displays the user-dened MAC and WWN address.
• racadm getmacaddress -c io-identity
• racadm getmacaddress -c io-identity -m server -2
• Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
racadm getmacaddress -c all
• Displays the chassis assigned WWN/MAC address.
racadm getmacaddress -c flexaddress
• Displays the MAC/WWN addresses for all LOMs or mezzanine cards.
racadm getmacaddress -c factory
Displays the MAC address for chassis.
racadm getmacaddress -m chassis
<Name> <Presence> <BMC MAC Address> <NIC1 MAC Address> <NIC2 MAC Address>
CMC Present N/A F0:4D:A2:77:71:72 N/A
Displays the MAC address for switch-1
racadm getmacaddress -m switch-1
<Name> <Presence> <BMC MAC Address> <NIC1 MAC Address> <NIC2 MAC Address>
Switch-1 Present Not Installed 00:00:00:00:00:00 Not Installed
RACADM Subcommand Details 43