CLI Guide

4 Enabled Not Present

Displays the current FlexAddress setting for slot 4

racadm getflexaddr -i 4

Slot-4 server presence = Present

Slot-4 flexaddress enabled = 1

Name> <Type> <Server-Assigned> <Chassis-Assigned>

slot4-idrac Controller 18:A9:9B:FD:C7:57 F8:DB:88:3D:

9F:A7(active)

slot4-A 10 GbE KR 00:90:FA:51:36:54 F8:DB:88:3D:

9F:A8(active)

10 GbE KR/3 00:90:FA:51:36:55 F8:DB:88:3D:

9F:AA(active)

FCoE-WWN 10:00:00:90:FA:51:36:55 20:01:F8:DB:88:3D:

9F:AA(active)

10 GbE KR/3 00:90:FA:51:36:56 F8:DB:

88:3D:A2:78(active)

NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.

getioinfo

Table 15. getioinfo

Description Displays general information about the I/O modules on the chassis.

To use this subcommand, you must have the CMC Login User privilege.

NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber Channel, and

Inniband.

Synopsis

racadm getioinfo

racadm getioinfo [-m <module>]

racadm getioinfo [-m <module>][-s]

Input -m — Species the module or device. The <module> must be switch — <n>, where n = 1–2

-s — Displays the stack information.

Example

racadm getioinfo

switch-1 ON R1-PT VRTX

1Gb Master

Pass-

through

N/A Gigabit

Ethernet

Present OK

RACADM Subcommand Details 41