CLI Guide

<Server#> <Presence> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-3 Present PCIe OK None N/A
server-4 Not Present None N/A None N/A
getdcinfo -n
<
Server#> <Presence> <DC1 Model Name> <DC2 Model Name>
server-1 Present None None
server-2 Not Present None None
server-3 Not Present None None
server-4 Present None Broadcom M5708t
getexaddr
Description Enabled or disabled status is displayed for the entire chassis and
fabric ID decoder. Use the command with -i option to display the
MACs/WWN on a per-slot-basis
The decoder values in the Type column indicate the protocols of
the network cards:
• 0— Unsupported
• 1— ISCSI
• 2— FCoE-FIP
• 3— iSCSI/FCoE-FIP
To use this subcommand, you must have CMC Login User privilege.
NOTE: If FlexAddress is not activated on the chassis, the
command displays server-assigned MAC/WWN addresses.
If the slot is empty, the command leaves the server-
assigned MAC/WWN addresses blank. If an external
console controls the MAC/WWN addresses, the command
displays an externally managed message.
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i <slotNum> — Species the slot information to be displayed.
<slotNum> must be from 1 to 4.
Example
Displays the current FlexAddress settings for all the slots and fabrics.
racadm getflexaddr
<Slot#> <Status> <Server Presence>
1 Enabled Present
2 Enabled Present
3 Enabled Not Present
40 RACADM Subcommand Details