CLI Guide
• Displays the conguration properties for the user named root.
racadm getconfig -u root
• Displays the user group instance at index 2 with verbose
information for the property values.
racadm getconfig -g cfgUserAdmin -i 2 -v
If you do not congure the following key attributes in their
respective groups for a particular index, the groups are not saved in
to the le. This is applicable for all the index groups.
Groups Key Attributes
cfgEmailAlert cfgEmailAlertAddress
cfgLDAPRoleGroup cfgLDAPRoleGroupDN
cfgServerInfo cfgServerBmcMacAddress
cfgStandardSchema cfgSSADRoleGroupName
cfgTraps cfgTrapsAlertDestIPAddr
cfgUserAdmin cfgUserAdminUserName
getdcinfo
Description
Displays general I/O module and daughter card conguration information. Only the CMC controls
daughtercards.
To use this subcommand, you must have the CMC Login User privilege.
NOTE: Fabric verication for server DCs is performed only when the chassis is turned on.
When the chassis is on stand-by power, iDRACs on the server modules remain turned o
and thus are unable to report the server's DC fabric type. The DC fabric type may not be
reported in the CMC user interface until iDRAC on the server is turned on.
Synopsis
racadm getdcinfo
Input -n — Displays the model names for the daughter cards in servers.
Example
The following example is for a system with multi-slot servers.
racadm getdcinfo
Group A I/O Type : Gigabit Ethernet
Group B I/O Type : PCIe
Group C I/O Type : PCIe
<IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
<Server#> <Presence> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-1 Present PCIe OK PCIe OK
server-2 Not Present None N/A None N/A
RACADM Subcommand Details 39