CLI Guide
• racadm feature -r -c ExtendedStorage
Input
• -s — Displays the status of active features.
• -d — Deactivates the feature specified in -c option.
NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating one of them results in
deactivation of the other feature also. However, ExtendedStorage is not aected by the deactivation of
FlexAddress or FlexAddresPlus.
• -r — Repair damaged/unformatted ExtendedStorage media.
NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.
CAUTION: Using the -r switch reformats the SD media in the active CMC card slot. Any existing
ExtendedStorage data will be lost.
• -c — <featurename> must be one of the following:
• flexaddress (with -d)
• flexaddressplus (with -d) ExtendedStorage (with -d or -r)
featurecard
Description Veries proper SD card installation and displays the SD card status.
To use this subcommand, you must have the Chassis
Conguration Administrator privilege.
Synopsis
racadm featurecard -s
Input -s — Lists active SD card features and SD card status.
Output
An example of output is given here.
racadm featurecard -s
Active CMC: The feature card inserted is
valid, serial number = CN0H871T137401112222A00
The feature card contains the following
feature(s):
FlexAddress: bound
FlexAddressPlus: bound
ExtendedStorage: bound
Standby CMC: The feature card contains the
following feature(s):
FlexAddress: not bound
FlexAddressPlus: not bound
ExtendedStorage: bound
fwupdate
Description
Allows you to update the rmware on the active and standby CMC rmware, chassis infrastructure rmware, and
storage component rmware (RAID controller, hard disk drive, and expander). You can:
• Check the rmware update process status.
• Update the rmware from a FTP or a TFTP server by providing an IP address and optional path.
• Update the rmware from the local le system using remote RACADM.
• The subcommand updates one or more devices of a single type at a time.
RACADM Subcommand Details 33