CLI Guide
• -a — Creates and enables an iDRAC root user if it does not exist, and is executed on all the
existing servers in the chassis.
• -u root — Indicates that the <password> is supplied for the root user on the server. root is a
constant parameter, the only value that is valid with the ‑u option.
• -m <module> — Species the server you want to congure.
Legal value must be one of the following values:
• server-<n> where n=1 to 4
• switch-<n> where n=1
• -p <password> — Species the password for the root user on the server.
• -s <ipaddress subnet gateway> — Sets the IP address, subnet mask, and gateway for the
specied server, separated by single spaces.
• ipaddress — A string representing a valid IP address. For example, 192.168.0.20.
• subnet — A string representing a valid subnet mask. For example, 255.255.255.0.
• gateway — A string representing a valid gateway address. For example, 192.168.0.1.
• -d — Enables DHCP for the specied server.
The -s and -d options cannot be used together in the same command.
• -6 — Enables IPv6 auto conguration (when used with -d.) Sets static IPv6 addresses (when
used with -s).
• -q — Displays or modies the quick deploy parameters.
• -n<numofblades> — Species the number of reserved IP addresses for quick deploy. The valid
values are 2 and 4.
• -e — Uses the CMC DNS settings for quick deploy. The legal values are:
• 1 — Enable
• 0 — Disable
• --qd — Updates the quick deploy parameters to the servers. This option works only with the -
q option.
Output
None
Example
• racadm deploy -m server-8 -s 192.168.0.20 255.255.255.0
192.168.0.1
The server was deployed successfully.
The deploy command generates an error when used on the extension slot of a multi-slot server.
• racadm deploy -m server-9 192.168.0.11 255.255.255.0 192.168.0.1
ERROR: Server in slot 9 is an extension of the server in slot 1.
• racadm deploy -m server-7 -u root -p calvin -s -6 ::/64 :: 10
Displayable Characters
Displayable characters include the following set:
abcdefghijklmnopqrstuvwxwz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/
eventlters
Description
Gets, sets, and displays the list of event lter settings.
30 RACADM Subcommand Details