CLI Guide

cfgDvdInfo
This group is used to view the mapping information for the DVD drive in the chassis.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
cfgDvdMapping Read or Write
Description Maps the slots to the DVD drive in the chassis:
Legal Values 1, 2, 3, and 4 are the slot numbers that are specied.
Default 1
cfgDvdSlot<num>Enable Read or Write
Description Enable the slots (1 to 4) to access the DVD:
• cfgDvdSlot1Enable
• cfgDvdSlot2Enable
• cfgDvdSlot3Enable
• cfgDvdSlot4Enable
Legal Values 0 disables the mapping and 1 enables the mapping.
Default None
cfgLcdInfo
This group is used to view the LCD locale, LCD orientation, and to check if the buttons to navigate through the LCD menu are enabled.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
The legal values when you run the getconfig -g cfgLcdInfo to view information about the following are:
• cfgLcdLocale=es
• cfgLcdOrientation=0
• cfgLcdButtonsEnable=1
cfgAlerting
This group is enables or disables SNMP event trap alerting and sets the event lter.
Use this object with the cong or getcong subcommands.
CMC Property Database Group and Object Descriptions
161