CLI Guide

cfgAdDomainController3. CMC does not fail over to the specied
domain controllers when DNS lookup fails or none of the servers
returned by the DNS lookup works.
Legal Values
• 1 (TRUE)—use DNS to look up domain controllers
• 0 (FALSE)—use pre‑congured domain controllers
Default 0
cfgADGcRootDomain (Read/Write)
Description The name of the Active Directory root domain used for DNS look
up, to locate Global Catalog servers.
Legal Values String. Maximum character length = 254
Default Null
cfgADGcSRVLookupEnable (Read/Write)
Description
Determines how the global catalog server is looked up. If using
pre‑congured global catalog servers, then CMC uses the values
cfgAdGlobalCatalog1, cfgAdGlobalCatalog2, and
cfgAdGlobalCatalog3.
Legal Values
• 0(FALSE)—use pre‑congured Global Catalog Servers (GCS)
• 1(TRUE)—use DNS to look up GCS
Default 0
cfgADSpecifyServerEnable
Description
Allows you to enable or disable and specify an LDAP server or a
global catalog server. Use cfgADDomainController or
cfgADGlobalCatalog to specify the IP address.
Legal Values
• 1 (enabled)
• 0 (disabled)
Default 0
cfgLDAP
This group allows you to congure settings related to the Lightweight Directory Access Protocol (LDAP).
Use this object with the cong or getcong subcommands.
To use this object property for CMC, you must have the Chassis Conguration Administrator privilege.
144
CMC Property Database Group and Object Descriptions