CLI Guide

cfgSessionManagement
This group contains parameters to congure the number of sessions that can connect to CMC. One instance of the group is allowed.
Displays current settings for and congures idle timeout properties for Web server, Telnet, SSH, and RACADM sessions. Changes to idle
timeout settings take eect at the next login. To disable idle timeout for a connection, set this property to 0.
The following sections provide information about the objects in the cfgSessionManagement group.
cfgSsnMgtRacadmTimeout (Read/Write)
Description Denes the idle timeout in seconds for the Remote RACADM interface. If a remote RACADM session remains
inactive for more than the specied timeout, the session is automatically ended.
Legal Values 0, 10 –1920
Default iDRAC - 60
CMC - 30
Example
racadm getconfig -g cfgSessionManagement cfgSsnMgtWebserverTimeout=0
cfgSsnMgtTelnetIdleTimeout=0
cfgSsnMgtSshIdleTimeout=300
cfgSsnMgtRacadmTimeout=0
cfgSsnMgtWebserverTimeout (Read/Write)
Description
Denes the Web server time-out. This property sets the amount of time (in seconds) that a
connection is allowed to remain idle (there is no user input). The session is cancelled if the time
limit set by this property is reached. Changes to this setting do not aect the current session.
You must log out and log in again to make the new settings eective.
An expired Web server session logs out the current session.
Legal Values 60 – 10800
Default 1800
cfgSerial
This group contains conguration parameters for CMC services. One instance of the group is allowed.
Use this object with the getconfig or config subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
The following sections provide information about the objects in the cfgSerial group.
NOTE
: The cfgSerial object group is applicable for iDRAC Enterprise on server modules for only two properties—
cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
122 CMC Property Database Group and Object Descriptions