CLI Guide

Default for CMC CMC
cfgLanNetworking
This group contains parameters to congure NIC for IPv4.
One instance of the group is allowed. Some objects in this group may require iDRAC NIC to be reset, which may cause a brief loss in
connectivity. Objects that change iDRAC NIC IP address settings close all active user sessions and require users to reconnect using the
updated IP address settings.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
NOTE: You can congure any setting that is not preceded by the hash sign (#) in the output. To modify a congurable object, use
the -o option.
The following sections provide information about the objects in the cfgLanNetworking group.
cfgNicIPv4Enable (Read or Write)
Description Enables or disables the IPv4 stack.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgNicVLanId (Read or Write)
Description
Species the VLAN ID for the network VLAN conguration (in
CMC for iDRAC Enterprise on server modules). This property is only
valid if cfgNicVLanEnable is set to 1 (enabled).
Legal Values 1 – 4000 and 4021 – 4094
Default 1
Example
racadm config -g cfgLanNetworking -o
cfgNicVlanID
1
cfgDNSDomainNameFromDHCP (Read/Write)
Description
Species that the DNS domain name should be assigned from the
network DHCP server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
CMC Property Database Group and Object Descriptions 109