CLI Guide

This subcommand when executed performs the following:
• Checks command syntax.
• Veries whether the required system resources are available.
• Validates Active Directory conguration.
• Veries the SSL certicate and if the certicate signing request
(key) exists.
• Acquires LDAP and Global Catalog Service records from DNS.
• Acquires user privileges from the Active Directory server.
• Checks the time to acquire user privileges with the allotted time
to login.
NOTE: In the event of an error, the command displays the
test that failed, all the tests performed earlier to the test
that failed, and all the error messages.
Synopsis
testfeature -f ad -u <username> -p <password>
[-d <diagnostic-message-level>]
Example
• testfeature –f ad –u user@domain –p secret
SUCCESSFUL: User permissions are xxxxxppp.
The last three digits are the user's permissions.
• testfeature –f adkrb –u
user_name@domain_name
SUCCESSFUL: User permissions are 80000fff.
• testfeature -f ldap -u harold -p barrel
SUCCESSFUL: User permissions are 0x00000fff.
testfeature -f adkrb
Description
Tests the Active Directory conguration using the Kerberos
authentication (single sign-on or Smart Card login). Use the optional
-d switch to obtain additional diagnostic information, as needed.
This subcommand, when run, performs the following:
• Checks command syntax.
• Veries if the required system resources are available.
• Validates Active Directory conguration.
• Veries if the SSL certicate and certicate signing request
(key) exists.
• Acquires LDAP and Global Catalog Service records from DNS.
• Veries if the CMC can acquire CMC, LDAP and Global Catalog
servers FQDN through reverse IP lookups.
• Veries that the CMC principal name matches the principal
name in the uploaded Keytab le.
• Veries that the CMC acquires a Kerberos TGT.
• Acquires user privileges from the Active Directory server.
• Checks the time to acquire user privileges with the allotted time
to login.
NOTE: In the event of an error, the command outputs all
tests performed up to and including the test that failed,
and all the error messages.
Synopsis
testfeature -f adkrb -u <username> [-d
<diagnostic-message-level>]
testfeature -f ldap
104
RACADM Subcommand Details