Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.0 for Dell PowerEdge VRTX
181182183184185186187188189190
Table Of Contents
The Configure Physical Disks page is displayed.
2. Select the physical disk from which you want to erase the data.
3. From the Physical Disk Actions drop-down, select Cryptographic Erase and click Apply.
A message is displayed prompting you to confirm the action.
4. Click Yes to proceed
All data from the selected physical disk is removed.
Applying Virtual Adapter Access Policy To Virtual
Disks
Make sure that physical disk drives are installed and the virtual disks are created.
To apply the virtual adapter access policy:
1. In the left pane, click Chassis Overview > Storage > Virtual Disks > Assign.
2. On the Assign Virtual Disks page, under the Access Policy for Virtual Adapters section, from the Virtual Adapter
<number> drop-down menu, select Full Access to each physical disk drive.
3. Click Apply.
You can now assign virtual adapters to server slots. For more information, see the Assigning Virtual Adapters to Slots section in
this User's Guide.
Modifying Virtual Disk Properties Using CMC Web
Interface
To modify the virtual disk properties:
1. In the left pane, click Chassis Overview > Storage > Virtual Disks > Manage.
2. On the Manage Virtual Disks page, from the Virtual Disk Actions drop-down menu, select one of the following actions,
and then click Apply.
● Rename
● Delete
NOTE:
If you select Delete, the following message is shown indicating that deleting a virtual disk permanently deletes
data available in that virtual disk.
Deleting the virtual disk removes the virtual disk from the controller's
configuration. Initializing the virtual disk permanently erases data from the
virtual disk.
● Edit Policy: Read Cache
● Edit Policy: Write Cache
● Edit Policy: Disk Cache
● Initialize: Fast
● Initialize: Full
● Encrypt Virtual Disk
Enclosure Management Module
Enclosure Management Module (EMM) provides data path and enclosure management tasks for enclosure. EMM monitors and
controls the enclosure components and access to the drives.
EMM communicates enclosure attributes and states to the host server. The EMM modules monitor the following components of
the enclosure:
● Fans
● Power supplies
188
Managing Chassis Storage