Users Guide

Table 19. User Types (continued)
Privilege Description
● Server Reboot
Test Alert User User can send test alert messages.
Debug Command
Administrator
User can execute system diagnostic commands.
Fabric A
Administrator
User can set and configure the Fabric A IOM.
Fabric B
Administrator
User can set and configure the Fabric B, which corresponds to the first mezzanine card in the
servers and is connected to the fabric B circuitry in the shared PCIe subsystem in the main board.
Fabric C
Administrator
User can set and configure the Fabric C, which corresponds to the second mezzanine card in the
servers and is connected to the fabric C circuitry in the shared PCIe subsystem in the main board.
The CMC user groups provide a series of user groups that have preassigned user privileges.
NOTE: If you select Administrator, Power User, or Guest User, and then add or remove a privilege from the pre-defined set,
the CMC Group automatically changes to Custom.
Table 20. CMC Group Privileges
User Group Privileges Granted
Administrator
● CMC Login User
● Chassis Configuration Administrator
● User Configuration Administrator
● Clear Logs Administrator
● Server Administrator
● Test Alert User
● Debug Command Administrator
● Fabric A Administrator
Power User
● Login
● Clear Logs Administrator
● Chassis Control Administrator (Power commands)
● Server Administrator
● Test Alert User
● Fabric A Administrator
Guest User Login
Custom Select any combination of the following permissions:
● CMC Login User
● Chassis Configuration Administrator
● User Configuration Administrator
● Clear Logs Administrator
● Chassis Control Administrator (Power commands)
● Server Administrator
● Test Alert User
● Debug Command Administrator
● Fabric A Administrator
None No assigned permissions
Table 21. Comparison of Privileges Between CMC Administrators, Power Users, and Guest Users
Privilege Set Administrator
Permissions
Power User
Permissions
Guest User
Permissions
CMC Login User Yes Yes Yes
118 Configuring User Accounts and Privileges