CLI Guide

<Num> <sensorN
ame>
<status> <reading
>
<LW> <LC> <UW> <UC> <PWM>
4 Blower-4 OK 1702 rpm 1108 923 N/A N/A 20
Sensor Type: Temp
<Num> <sensorNam
e>
<status> <reading> <LW> <LC> <UW> <UC>
1 Chassis
Ambient
OK 27 C 3 —7 42 47
2 Server-1 OK 31 C 3 —7 42 47
3 Server-3 OK 29 C 3 —7 42 47
Sensor Type: Power
<Num> <sensorName> <status> <health>
1 PS-1 Slot Empty N/A
2 PS-2 Online OK
3 PS-3 Slot Empty N/A
PS-4 Slot Empty N/A
Sensor Type: Cable
<Num> <seonsorName> <status>
1 IO-Cable OK
2 FPC-Cable OK
Sensor Type: Door
<Num> <sensorName> <status>
1 Chassis Intrusion Closed
getslotname
Description
Displays the name, host name (if available) and iDRAC DNS name of all the four slots, or of a
specified slot (indicated by the slot number) in the chassis. Optionally, use this command to find
if the slot name or host name, or iDRAC DNS name is displayed in the CMC Web interface, or
with the getslotname [-i <slotNum> | -h] command. If the host name is not available, the static
slot name is used.
NOTE: Lengthy slot names, host names, or iDRAC DNS names are truncated when the slot
names are displayed.
To use this subcommand, you must have CMC Login User privilege.
Synopsis
● racadm getslotname
● racadm getslotname [-i <slotNum> | -h]
● racadm getslotname -h
Input
● None -
60 RACADM Subcommand Details