CLI Guide

Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
racadm getmacaddress -c all
<Name> <Type> <Presence> <Active WWN/MAC> <Partition
Status>
<Assignmen
t Type>
CMC N/A Present 34:17:EB:E6:E0:24 N/A Factory
Server-1
-A
10 GbE KR Not
Installed
10:98:36:AC:70:EB Not
Installed
Not
Installed
Server-2 Not
Installed
Not Present Not Installed Not
Installed
Not
Installed
Server-3
-A
Reserved Present
Switch-4 Not
Installed
Not Present Not Installed Not
Installed
Not
Installed
Switch-1 Not
Installed
Not Present Not Installed N/A N/A
NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all
commands are run, the output is displayed as Not Installed in the following columns:
● <Presence>
● <NIC1 MAC Address>
● <NIC2 MAC Address>
getmodinfo
Table 16. getmodinfo
Description
Displays configuration and status information for all modules or a specified module (server, switch, CMC,
fan unit, blower, power supply unit, chassis, DVD, main-board, IO cable, and FPC cable) in the chassis.
To use this subcommand, you must have CMC Login User privilege.
NOTE: The service tag field is blank for modules that do not have service tags.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
● -m <module> — Specifies the module for which the configuration and status information is required.
The default command (no options) displays information about all the major components in the chassis.
<module> can be one of the following values:
○ server-n, where n = 1 to 4
○ switch-n, where n = 1
○ CMC-n, where n = 1 or 2
○ fan-n, where n = 1 to 6
RACADM Subcommand Details 49