CLI Guide

Table Of Contents
cfgDNSServer1 (Read/Write)
Description Specifies the IPv4 address for DNS server 1. This property is
only valid if cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to
identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgDNSServer2 (Read/Write)
Description
Retrieves the IPv4 address for DNS server 2. This parameter
is only valid if cfgDNSServersFromDHCP is set to 0
(FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to
identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgNicEnable (Read/Write)
Description
Enables or disables CMC network interface controller. If the
NIC is disabled, the remote network interfaces to CMC are no
longer accessible and CMC are only available through the local
or serial RACADM interface.
Legal Values
1 (TRUE)
0 (FALSE)
Default 1
cfgNicIpAddress (Read/Write)
Description
Specifies the static IPv4 address to be assigned to the RAC or
CMC.
NOTE: This parameter is only configurable if the
cfgNicUseDhcp parameter is set to 0 (FALSE.)
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default
192.168.0.120
CMC Property Database Group and Object Descriptions 121