Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 2.30 For Dell PowerEdge FX2
11121314151617181920
Table 3. Supported remote access connections (continued)
Connection Features
chained between chassis in the Stacking mode. Ensure that the cabling
model matches the CMC setting for the intended usage.
• DHCP support.
• SNMP traps and e-mail event notification.
• Network interface for the iDRAC and I/O Modules (IOMs).
• Support for Telnet/SSH command console and RACADM CLI commands including system
boot, reset, power-on, and shutdown commands.
Serial port
• Support for serial console and RACADM CLI commands including system boot, reset,
power-on, and shutdown commands.
• Support for binary interchange for applications specifically designed to communicate with a
binary protocol to a particular type of IOM.
• Serial port can be connected internally to the serial console of a server, or I/O module,
using the connect (or racadm connect) command.
Supported platforms
The CMC supports the PowerEdge FX2 and FX2s chassis models. The supported platforms are PowerEdge FC430, PowerEdge FC630,
PowerEdge FM120x4, PowerEdge FC830, PowerEdge FC640, and PowerEdge FD332. For information about compatibility with CMC, see
the documentation for your device.
For the latest supported platforms, see the Dell Chassis Management Controller (CMC) Version 2.0 for Dell PowerEdge FX2/FX2s
Release Notes available at dell.com/cmcmanuals.
Supported web browsers
For the latest information about supported web browsers, see the Dell Chassis Management Controller (CMC) Version 2.3 for Dell
PowerEdge FX2/FX2s Release Notes at dell.com/cmcmanuals.
• Microsoft Internet Explorer 11
• Microsoft EDGE
• Safari version 10.1.2
• Safari version 11.1.2
• Mozilla Firefox 61
• Mozilla Firefox 62
• Google Chrome 68
• Google Chrome 69
NOTE:
By default, TLS 1.1 and TLS 1.2 are supported in this release. However, to enable TLS 1.0 use the following
racadm command:
$ racadm config -g cfgRacTuning -o cfgRacTuneTLSProtocolVersionEnable TLSv1.0+
Supported firmware versions
The following table lists the firmware versions for BIOS, iDRAC, and Lifecycle Controller that support the servers listed:
Table 4. Latest Firmware Versions for BIOS, iDRAC, and Lifecycle Controller
Servers BIOS iDRAC Lifecycle Controller
PowerEdge FC830 2.7.1 2.52.52.52 2.52.52.52
PowerEdge FC630 2.7.1 2.52.52.52 2.52.52.52
PowerEdge FC430 2.7.1 2.52.52.52 2.52.52.52
Overview 15