CLI Guide

Table 96. Details of setsysinfo (continued)

NOTE: The special characters " (double quote), ` (back quote), &(ampersand), >

(greater than), < (less than), and \ (backslash) are not supported for this

subcommand.

Synopsis

racadm setsysinfo [-c chassisname|chassislocation] <string>

Input • < string > — Indicates a maximum of 64 non-extended ASCII chassis name or location.

• -c — Sets the chassis name or location.

Example

racadm setsysinfo -c chassisname "Dell Rack System"

The chassis name was set successfully.

SSH or Telnet RACADM

• racadm getconfig -g <groupname> [-o <objectname>][-i <indexnumber>]

• racadm <subcommand>

Example

• racadm getconfig -g idracinfo

• racadm getsysinfo

sshpkauth

Table 97. Details of sshpkauth

Description Enables you to upload and manage up to four different SSH public keys per user. You can upload a

key file or key text, view keys, or delete keys.

RSA key size should be between 768 and 4096 and the recommended DSA key size is 1024.

This command has three mutually exclusive modes—upload, view, and delete that are determined

by the options.

Upload

The upload mode allows you to upload a keyfile or to copy the key text on the command line. You

cannot upload and copy a key at the same time.

Remote RACADM:

racadm sshpkauth -i <2 to 16> -k <1 to 4> -f <filename>

racadm sshpkauth -i <2 to 16> -k <1 to 4> -t

<key-text>

Telnet/ssh/serial RACADM:

racadm sshpkauth -i <2 to 16> -k <1 to 4> -t

<key-text>

View

RACADM Subcommand Details