CLI Guide

Table 88. Details of set (continued)

Synopsis

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f

<filename> -t xml

racadm set -f <filename> -t xml -u <username> -p <password> -l <CIFS

share>

racadm set -f <filename> -t xml -l <NFS share>

racadm set -f <filename> -t xml -u <username> -p <password> -l <CIFS

share> -m server-<n>

racadm set -f <filename> -t xml -l <NFS share> -m server-<n>

racadm set -f <filename> -t xml -l extended -m server-<n>

racadm set delete serverprofiles -f <filename> -l extended -t xml

racadm set delete serverprofiles -m server-<n> --assign

racadm set -f <filename> -t xml -l <CIFS share> -u <username> -p

<password> -m server-<n> --assign

racadm set -f <filename> -t xml -l <NFS share> -m server-<n> --assign

racadm set -f <filename> -t xml -l extended -m server-<n> --assign

racadm set -f <profile_file_name> -u <network_share_username> -p

<network_share_passwd> -l <CIFS Share> --import -t xml

racadm set -f <profile_file_name> -l <NFS Share> --import -t xml

racadm set -m server-<n> -s

Input

• -f: import CMC configuration or CMC event filter from a file.

• -u: username of the remote share from where the file must be imported.

• -p: password for the remote share from where the file must be imported.

• -l: network share location from where the file must be imported.

• -t: specify the file type to be imported. The valid value is “XML”.

• -m—<module>—the possible values are:

○ server-<n>—where n = 1 to 16

○ all—for listing profiles assigned to all blades.

○ server-<nx>—where n = 1 to 8; x = a to d (lower-case)

• -s—check the status of the last successfully initiated server profile operation.

Example

• Configure event filter configurations from a configuration file using remote racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -f file.txt

RACADM Subcommand Details 83