CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 2.30 For Dell PowerEdge FX2

Table 75. Details of getversion (continued)

NOTE: To use this subcommand, you must have CMC Login User privilege.

Synopsis

• racadm getversion

• racadm getversion [-b | -c] [-m <module>]

• racadm getversion -l [-m <module>] [-f <filter>]

Input

NOTE: The -b, -c and -l options are not available for CMC modules.

NOTE: The -l option requires that the Lifecycle Controller service is enabled on the

servers. For version information, see the RACADM Readme available at dell.com/

support/manuals.

• (none) — Displays the version information for all targets or devices.

server-1a 2.15.15.15 (18) PowerEdge FC430

iDRAC8 Y

server-1b 2.40.40.40 (13) PowerEdge FC430

iDRAC8 Y

server-1c 2.10.10.10 (49) PowerEdge FC430

iDRAC8 Y

server-1d 2.40.40.40 (13) PowerEdge FC430

iDRAC8 Y

server-3a 2.10.10.10 (27) PowerEdge FC430

iDRAC8 Y

server-3b 2.10.10.10 (49) PowerEdge FC430

iDRAC8 Y

server-3c 2.30.30.30 (10) PowerEdge FC430

iDRAC8 Y

server-3d 2.10.10.10 (49) PowerEdge FC430

iDRAC8 Y

<Switch> <Model Name> <HW

Version> <FW Version>

switch-1 1GBE PASS-THROUGH MODULE A00

N/A

<CMC> <CMC

Version> <Updatable>

cmc

2.00.000.20161003sahu Y

Main Board 1.20.A00.201502058

System.Chassis.1#Infra

structure.1

• -b — Displays the server's current BIOS version (default is iDRAC version).

• -c — Displays the server's current CPLD version.

• -l — Displays the firmware versions Lifecycle Controller components.

• -f < filter > — Filters the components. Must be used with -1 and be one of the following values:

○ bios: BIOS

○ idrac: iDRAC

○ usc: Unified Server Configurator (Lifecycle Controller)

○ diag: 32-bit Diagnostics

○ drivers: OS Driver Package

○ nic-x: Network Interface card. See -l output for possible values of x.

• -m < module > — Specifies the module or device for which you must retrieve the version

information.

RACADM Subcommand Details