CLI Guide

Table 59. Details of getsel (continued)
• -s — Specifies the starting record used for the display.
• -E — Displays RAW SEL data with the other data for each entry.
• -R — Displays only RAW SEL data for each entry.
• -i — Displays the number of entries in the SEL.
• --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX
more command.)
NOTE: The -A, -E, -o, and -R options are deprecated.
Output
Record: 12
Date/Time: 11/20/2011 14:19:34
Source: system
Severity: Ok
Description: C: boot completed.
Example
racadm getsel
getslotname
Table 60. Details of getslotname
Description
Displays the name, host name, and iDRAC DNS name of all the four slots, or of a specified slot
(indicated by the slot number) in the chassis. Optionally, use this command to find if the slot name or
host name, or iDRAC DNS name is displayed in the CMC web interface, or with the getslotname [-i
<slotNum> | -h] command. If the host name is not available, the static slot name is used.
NOTE: Lengthy slot names, host names, or iDRAC DNS names are truncated when the
slot names are displayed.
To use this subcommand, you must have CMC Login User privilege.
Synopsis
• racadm getslotname
• racadm getslotname [-i <slotNum> | -h]
• racadm getslotname -h
Input
• None -
Displays the slot name for all the four slots in the chassis.
• -i < slotNum > - specifies the slot number.
Values: 1 to 4
• -h - Specifies whether to display the slot name, iDRAC DNS name, or the host name (if available).
The values are:
○ 0 — Displays the slot name
○ 1 — Displays the host name instead of the slot name
○ 2 — Displays the iDRAC DNS name instead of the slot name
RACADM Subcommand Details 57