CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 2.30 For Dell PowerEdge FX2

Table 51. Details of getmodinfo (continued)

Table 52. Details (continued)

Server-2

b

Present OFF OK JD3FRTW JD3FRTWb

Server-2

c

Present OFF OK JD3FRTW JD3FRTWc

Server-2

d

Present OFF OK JD3FRTW JD3FRTWd

Cable-IO Present ON OK STOMP11 N/A

Cable-CP Present ON OK STOMP11 N/A

getniccfg

Table 53. Details of getniccfg

Description Displays the current NIC settings.

Synopsis

racadm getniccfg

Input

racadm getniccfg

racadm getniccfg –m <module>

where –m must be one of the following values:

• chassis

: default state if -m is not specified

•

server-n

: where n = 1 to 4

• switch-n

: where n = 1 or 2

Example

racadm getniccfg

NIC Enabled = 1

IPv4 Enabled = 1

DHCP Enabled = 1

Static IP Address = 192.168.0.120

Static Subnet Mask = 255.255.255.0

RACADM Subcommand Details 51