CLI Guide

Table 6. Details of chassislog (continued)
NOTE: It is recommended that you use Firmware RACADM to run this subcommand.
Synopsis
racadm chassislog view [-i]
racadm chassislog view [-c <category>] [-s <severity>] [-b
<subcategory>]
[-q <sequence no.>] [-n <number of records>] [-r <start
timestamp>]
[-e <end timestamp>]
Input
• -i — Displays the number of records present in the active log. You cannot use this option with
any other option.
• -c — The log type to filter the records. Provide multiple categories using a "," as the delimiter.
The value is case-insensitive. Valid Category values:
○ All
○ System
○ Updates
○ Audit
○ Config
• -b — The subcategory used to filter the records. Provide multiple subcategories using a “,” as
the delimiter. The value is case-insensitive.
• -q — The sequence number from which the records must be displayed.
• -n — Specifies the n Number of records to be displayed.
• -r — Displays events that have occurred after this time. The time format is yyyy-mm-dd
HH:MM:SS. The time stamp must be provided within double quotes.
• -e — Displays events that have occurred before this time. The time format is yyyy-mm-dd
HH:MM:SS. The time stamp must be provided within double quotes.
• -s — The severity used to filter the records. Provide multiple severities using a "," as the
delimiter. The value is case-insensitive. Valid Severity values:
○ 1. Warning
○ 2. Critical
○ 3. Info
NOTE: To view or export the Chassis log, only CMC Login User permission is required.
Example
• Display the number of records present in the Chassis Log:
racadm chassislog view -i
• Display the records having severities set to warning or critical, starting from sequence number 4:
racadm chassislog view -s warning,critical -q 4
• Display 5 records starting from sequence number 20:
racadm chassislog view -q 20 -n 5
• Display all records of events that have occurred between 2011-01-02 23:33:40 and 2011-01-03
00:32:15:
racadm chassislog view -r "2011-01-02 23:33:40" -e "2011-01-03
00:32:15"
• Display all the available records from the active Chassis log:
racadm chassislog view -n all
• Display the last 25 records from the Chassis log:
racadm chassislog view
20 RACADM Subcommand Details