CLI Guide

cfgPCIe
Displays the PCIe reassignment information.
Use this sub command with the getconfig and config commands.
The following section provides information about the objects in the cfgPCIe group.
cfgPCIeReassignmentEnable (Read/Write)
Table 332. Details of cfgPCIeReassignmentEnable
Description
Indicates whether the PCIe reassignment is enabled or disabled.
Legal Values • 0 — Disable
• 1 — Enable
NOTE: Power off all the servers in the FX2s chassis before changing the PCIe reassignment.
cfgQuickDeploy
This group is used to configure IDRAC deployment settings. You must have blade administrator privileges for configuring the settings.
cfgActionOnServerInsertion
Table 333. Details of cfgActionOnServerInsertion attribute
Description
Configures settings when a new server is inserted into the slot.
Legal Values
• 0 — No Action
• 1 — QuickDeploy Only
• 2 — Server Profile Only
• 3 — Quick Deploy and Server Profile
Default
0
cfgSetiDRACRootPasswordOnServerInsertion
Table 334. Details of cfgSetiDRACRootPasswordOnServerInsertion attribute
Description
Sets the iDRAC root password when a server is inserted into the chassis.
Legal Values
• 0 (False) — If the value is ‘1’ when the server is inserted, the iDRAC root
password is not set.
• 1 (True) — If the value is ‘1’ when the server is inserted, the iDRAC root
password is set.
Default
0
CMC Property Database Group and Object Descriptions 159