CLI Guide

Table 262. Example (continued)
Access Virtual Console 0x00000020
Access Virtual Media 0x00000040
Test Alerts 0x00000080
Execute Debug Commands 0x00000100
cfgChassisPower
This group is applicable only to CMC and contains parameters to display or configure power for the chassis.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgChassisPower group.
NOTE: While configuring chassis power from a file, update the value for one chassis power cap property and remove the
values for the other chassis power cap properties or, update the last percentage value as it is applicable to all chassis
power cap properties. The chassis power cap properties are: cfgChassisPowerCap, cfgChassisPowerCapF,
cfgChassisPowerCapBTU, cfgChassisPowerCapFBTU, cfgChassisPowerCapPercent, and
cfgChassisPowerCapFPercent.
cfgChassisInPower (Read Only)
Table 263. Details of cfgChassisInPower
Description Indicates the cumulative input power consumption data (in Watts and BTU/hr) captured from all
healthy and functional PSUs in the chassis.
Legal Values None
Default None
cfgChassisPeakPower (Read Only)
Table 264. Details of cfgChassisPeakPower
Description The maximum system input power consumption (in Watts), because the value was last cleared by a
user.
Legal Values None
Default None
cfgChassisPeakPowerTimestamp (Read Only)
Table 265. Details of cfgChassisPeakPowerTimestamp
Description The timestamp recorded when the peak input power consumption value occurred.
Legal Values
142 CMC Property Database Group and Object Descriptions