CLI Guide

Table 149. Details of cfgSerialConsoleEnable (continued)
Default
1
cfgSerialConsoleQuitKey (Read or Write)
Table 150. Details of cfgSerialConsoleQuitKey attribute
Description
Legal value:
NOTE: The CTRL key is represented by using the ^ (carat) character.
NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously
with another key to generate a character.
For example, striking both the CTRL key and the \ key simultaneously (rather than sequentially) is denoted as ^\.
Configuration options: The value must start with the ^ character, and must follow one of the characters — a-z, A-
Z, [,], \
In the input command, use \ without the quotes. For example:
config -g cfgSerial -o cfgSerialConsoleQuitKey "SHIFT+6"\\
Default:
cfgSerialConsoleIdleTimeout (Read/Write)
Table 151. Details of cfgSerialConsoleIdleTimeout
Description The maximum number of seconds to wait before an idle serial session is disconnected.
Legal Values • 0 = No timeout
• 60 – 1920
Default
1800
cfgSerialConsoleNoAuth (Read/Write)
Table 152. Details of cfgSerialConsoleNoAuth
Description Enables or disables the RAC or CMC serial console login authentication.
Legal Values • 0 (enables serial login authentication)
• 1 (disables serial login authentication)
Default 0
cfgSerialConsoleCommand (Read/Write)
Table 153. Details of cfgSerialConsoleCommand
Description Specifies a serial command that is executed after a user logs into the serial console interface.
Legal Values
A string representing a valid serial command. For example, connect server-1.
CMC Property Database Group and Object Descriptions 115