CLI Guide

CMC Property Database Group and Object
Descriptions
The CMC property database contains the configuration information for CMC. Data is organized by associated object, and objects are
organized by object group. The IDs for the groups and objects that the property database supports are listed in this section for CMC.
Use the group and object IDs with the RACADM subcommands to configure CMC.
NOTE: RACADM sets the value of objects without performing any functional validation on them. For example, RACADM
allows you to set the Certificate Validation object to 1 with the Active Directory object set to 0, even though Certificate
Validation can happen only if Active Directory is enabled. Similarly, the cfgADSSOEnable object can be set to 0 or 1 even
if the cfgADEnable object is 0, but it takes effect only if Active Directory is enabled.
All string values are limited to displayable ASCII characters, except where otherwise noted.
Topics:
• idRacInfo
• cfgLanNetworking
• cfgUserAdmin
• cfgEmailAlert
• cfgSessionManagement
• cfgSerial
• cfgOobSnmp
• cfgTraps
• cfgRacTuning
• cfgServerInfo
• cfgStorageModule
• cfgActiveDirectory
• cfgLDAP
• cfgLdapRoleGroup
• cfgLocation
• cfgStandardSchema
• cfgChassisPower
• cfgKVMInfo
• cfgAlerting
• cfgIPv6LanNetworking
• cfgCurrentLanNetworking (Read Only)
• cfgCurrentIPv6LanNetworking (Read Only)
• cfgNetTuning
• cfgRacSecurity
• cfgPCIe
• cfgQuickDeploy
idRacInfo
This group contains display parameters to provide information about the specifics of CMC being queried. One instance of the group is
allowed.
Use this object with the getconfig subcommand.
To use this object, you must have CMC Login User privilege.
The following sections provide information about the objects in the idRACInfo group.
3
102 CMC Property Database Group and Object Descriptions