Release Notes

• Supporting 2400W PSU on CMC version >= 1.4x.

Release 1.42

• Federal Information Processing Standards (FIPS) certified. Certification Number: #2861. For details, see www.csrc.nist.gov/

groups/STM/cmvp/documents/140-1/140val-all.htm#2861

Release 1.41

• Updated the OpenSSL open source package to version 1.0.2j.

Release 1.40

• Federal Information Processing Standards (FIPS) 140-2 cryptography capability.

• Disabling AC Power Recovery.

• Performing racresetcfg from CMC GUI.

• Updating the OpenSSL open source package to version 1.0.2f.

• Updating the OpenSSH open source package to version 7.1p1.

• Updating glibc to version 2.23 to address new security vulnerabilities.

• TLS 1.2 and TLS 1.1 by default.

• User configuration option to enable TLS 1.0 using RACADM.

• SNMPv3 configuration only in RACADM.

• Querying the health status of the chassis components using WSMan.

• Initiating Quick Deploy of blade through RACADM.

• Configuring CMC using WSMan for the following features:

• Host Name of Chassis

• IP Configuration

• DNS

• DNS Registration

• NTP

• Change Default Password

• Sending alerts when the power state of an IOM changes and when a power ON of IOM fails.

• Populating CMC Device name correctly in the inventory.

Release 1.32

• Quick link to the Dell Tech Center from CMC Web GUI.

Release 1.30

• Firmware and driver refresh of COMMs cards on Dell's 13th generation of PowerEdge servers.

• Capture and replicate chassis configurations through XML, based on the Chassis Configuration Profile.

• Support for blinking server identification LED from Quick Link on the Homepage.

• Backup or restore through XML, based on the Chassis Configuration Profile.

• Create and deploy a library of Boot Identity Profiles (boot from iSCSI/SAN configurations) to enable quick restore of workload to a

spare server.

• Populate iDRAC DNS setting from the CMC Quick Deploy page.

• Display iDRAC DNS name as the slot name.

• Option to view iDRAC LCLog results directly in CMC after applying a Server Configuration Profile.

• Support for Secure IOM mode. Secure IOM provides additional CMC security to support IOMs running in UC-APL secured

environments.

• Support for launching IOA GUI on the Homepage and I/O Module overview page.

What is New