CLI Guide

Table 94. Details of setniccfg (continued)

• Configuration of VLAN id and priority for a switch:

racadm setniccfg -m switch-1 -v 1000 7

• Removal of VLAN configuration from a switch:

racadm setniccfg -m switch-1 -v

setractime

Table 95. Details of setractime

Description Sets the date and time on the CMC.

To use this subcommand, you must have the Administrator privilege.

Synopsis • racadm setractime -d <yyyymmddhhmmss.mmmmmmsoff>

• racadm setractime -l YYYYMMDDhhmmss

• racadm setractime -z {?|timezone|timezone-prefix*}

Input • -d — Sets the time in the string yyyymmddhhmmss.mmmmmmsoff where:

— yyyy is the year

— mm is the month

— dd is the day

— hh is the hour

— mm is the minutes

— ss is the seconds

— mmmmmm is the number of microseconds

— s is a + (plus) sign or a - (minus) sign, which indicates the sign of the offset.

— off is the offset in minutes

NOTE: 'Off' is the offset in minutes from GMT and must be in 15-minute increments.

The timezone is represented as an offset from GMT, and the clock does not

automatically adjust to daylight savings time (for the '-d' option).

• -z <zone> - Sets the time zone by name or index, or lists possible time zones. For example,

PST8PDT (Western United States), 294 (Seoul), 344 (Sydney). <zone> may be:

— <?> lists the major timezone names/prefixes.

— <timezone> is the case-sensitive name of your timezone or the index listed by '-z timezone-

prefix*'.

— <timezone-prefix*> is a prefix of one or more timezones, followed by '*'.

NOTE:

The timezone or daylight savings time is fully supported for '-l' and '-z' options.

Omit the '-l' option to set the timezone only (eg. '-z US/Central').

• -l — Sets the local date and time in the string yyymmddhhmmss where:

— yyyy is the year

— mm is the month

— dd is the day

— hh is the hour

— mm is the minute

RACADM Subcommand Details