CLI Guide

Static Gateway = 192.168.0.1
Current IP Address = 10.94.224.187
Current Subnet Mask = 255.255.255.0
Current Gateway = 10.94.224.1
IPv6 Enabled = 0
Autoconfiguration Enabled = 1
Static IPv6 Address = ::/64
Static IPv6 Gateway = ::
Link Local Address = ::
Current IPv6 Address 1 = ::
Current IPv6 Gateway = ::
Speed = Autonegotiate
Duplex = Autonegotiate
Redundant mode = 0
VLAN Enable = 0
VLAN ID = 1
VLAN priority = 0
===============================================================================
Tracelog Information
===============================================================================
Jul 4 17:13:00 CMC-grapple systemd[1]: Stopping Rotate Logs...
Oct 4 17:14:00 CMC-grapple systemd[1]: logrotate.service holdoff time over, scheduling
restart.
Oct 4 17:14:00 CMC-grapple systemd[1]: Stopping Rotate Logs...
Oct 4 17:14:07 CMC-grapple ssnmgrd: root from 10.94.78.51: session timeout sid 25332
Oct 4 17:14:07 CMC-grapple ssnmgrd: root from 10.94.78.51: session timeout sid 25332
Oct 4 17:14:07 CMC-grapple sshd[11379]: Session close PID succeeds: sid=25332, User: root,
IP: 10.94.78.51
Oct 4 17:14:07 CMC-grapple sshd[11379]: Session close PID succeeds: pid=11379 sid=25332
Oct 4 18:47:43 CMC-grapple systemd[1]: Stopping System Logging Service...
Oct 4 18:48:08 CMC-grapple systemd[1]: logrotate.service holdoff time over, scheduling
restart.
Oct 4 18:48:08 CMC-grapple systemd[1]: Stopping Rotate Logs...
Oct 4 18:49:08 CMC-grapple systemd[1]: logrotate.service holdoff time over, scheduling
restart.
Oct 4 18:49:08 CMC-grapple systemd[1]: Stopping Rotate Logs...
Oct 4 18:50:08 CMC-grapple systemd[1]: logrotate.service holdoff time over, scheduling
restart.
Oct 4 18:50:08 CMC-grapple systemd[1]: Stopping Rotate Logs...
===============================================================================
Raclog Information
===============================================================================
SeqNumber = 7
Message ID = USR8513
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 2016-07-04 20:25:07
Message Arg 1 = root
Message Arg 2 = 10.94.18.232
Message Arg 3 = SSH
Message = root login successful from 10.94.18.232 (type=SSH).
--------------------------------------------------------------------------------
SeqNumber = 6
Message ID = PSU8517
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 2016-07-04 20:24:39
Message = PSU redundancy policy changed.
--------------------------------------------------------------------------------
SeqNumber = 4
Message ID = USR8513
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 2016-07-04 20:23:46
Message Arg 1 = root
Message Arg 2 = 10.94.18.232
Message Arg 3 = GUI
76
RACADM Subcommand Details