CLI Guide

Table 83. Details of (continued)

Example

racadm iping6 192.168.0.2

IPING6 192.168.0.2 (192.168.0.2): 56 data bytes

64 bytes from 192.168.0.2: icmp_seq=0 ttl=121 time=2.9

--- 192.168.0.2 ping statistics ---

1 packets transmitted, 1 packets received, 0 percent

packet loss

round-trip min/avg/max = 2.9/2.9/2.9 ms

racdump

Table 84. Details of racdump

Description This subcommand displays the comprehensive chassis status and configuration state information,

and historic event logs. Used for post-deployment configuration verification and during debugging

sessions.

To use this subcommand for CMC, you must have the CMC Login User privilege.

Synopsis

racadm racdump

Input Racdump includes the following subsystems and aggregates the following RACADM commands:

• General System/RAC information — getsysinfo

• Session information — getssinfo

• Sensor information — getsensorinfo

• Switches information (IO Module) — getioinfo

• Mezzanine card information (Daughter card) — getdcinfo

• All modules information — getmodinfo

• Power budget information — getpbinfo

• KVM information — getkvminfo

• NIC information (CMC module) — getniccfg

• Redundancy information — getredundancymode

• Trace log information — gettracelog

• RAC event log — getraclog

• System event log — getsel

Output

The following information is displayed when the racdump subcommand is processed:

• General system/RAC information

• Coredump

• Session information

• Process information

• Firmware build information

72 RACADM Subcommand Details