CLI Guide

Table 71. Details of getstoragemoduleinfo (continued)

Connected Server = SLOT-01

Controller Mode Capability = RAID

FQDD = RAID.Modular.2-1

Physical Disk Slots = 8-15

Connected Server = SLOT-2

Controller Mode Capability = HBA and RAID

Display format when storage sleds are not installed on the CMC FX2 or CMC FX2s system.

racadm getstoragemoduleinfo

This command is not supported on this configuration.

getsvctag

Table 73. Details of getsvctag

Description Displays the Service Tag of the host system.

Synopsis

racadm getsvctag

Input

getsvctag

Output

Chassis STPST02 N/A

Switch-1 0000000 N/A

Switch-2 N/A N/A

Server-1 FC830 FC830

Server-2 Extension(1) N/A

Storage-3 7647563 N/A

Storage-4 7654321 N/A

Example

racadm getsvctag

getsysinfo

Table 74. Details of getsysinfo

Description

Displays information related to CMC and chassis.

NOTE: The Hostname and OS Name fields in the getsysinfo output display accurate

information only if Dell OpenManage Server Administrator is installed on the managed

system. Else, these fields may be blank or inaccurate. An exception to this are VMware

operating system names, which are displayed even if Server Administrator is not

installed on the managed system.

Synopsis

racadm getsysinfo [-d] [-c] [-A] [-4] [-6]

Input

• -d - Displays CMC information.

• -c - Displays chassis information.

• -A - Does not display headers and labels.

• -4 - Displays IPv4 information.

62 RACADM Subcommand Details