CLI Guide

Table 61. Details of getslotname (continued)

• Display the name of the third slot.

racadm getslotname -i 3

• Verify if the option ‘0’ is set for displaying the slot name.

• Verify if the option ‘1’ is set for displaying the host name.

• Verify if the option ‘2’ is set for displaying the iDRAC DNS name.

getsensorinfo

Table 62. Details of getsensorinfo

Description

Displays status of chassis sensors.

NOTE: To use this subcommand, you must have CMC Login User privilege.

Synopsis

racadm getsensorinfo

Table 63. Examples

<Sensor Name> <Status> <Reading> <LC> UC

CPU1 VCORE PG OK 0 600 N/A

System Board 12V PG OK 0 600 N/A

System Board 3.3V PG OK 4037 600 N/A

System Board 5V PG OK 4045 600 N/A

CPU1 PLL PG OK 4107 600 N/A

System Board 1.5V PG OK 0 600 N/A

System Board 1.1V PG OK 0 600 N/A

CPU1 M01 VTT PG OK 0 600 N/A

CPU1 M23 VDDQ PG OK 0 600 N/A

CPU1 M23 VTT PG OK 0 600 N/A

CPU1 VSA PG OK 0 600 N/A

CPU1 M01 VDDQ PG OK 0 600 N/A

NDC PG OK 0 600 N/A

CPU1 VTT PG OK 0 600 N/A

MEZZB PG OK 0 600 N/A

MEZZC PG OK 0 600 N/A

PERC1 PG OK 0 600 N/A

Table 64. Current sensor

System Board Current OK 22 3 -7 42 47

Sensor Type: Processor

CPU1 Status OK Presence Detected N/

A N/A

RACADM Subcommand Details