CLI Guide

Table 60. Details of getsel (continued)

NOTE: The -A, -E, -o, and -R options are deprecated.

Output

Record: 12

Date/Time: 11/20/2011 14:19:34

Source: system

Severity: Ok

Description: C: boot completed.

Example

racadm getsel

getslotname

Table 61. Details of getslotname

Description

Displays the name, host name, and iDRAC DNS name of all the four slots, or of a specified slot

(indicated by the slot number) in the chassis. Optionally, use this command to find if the slot name or

host name, or iDRAC DNS name is displayed in the CMC web interface, or with the getslotname [-i

<slotNum> | -h] command. If the host name is not available, the static slot name is used.

NOTE: Lengthy slot names, host names, or iDRAC DNS names are truncated when the

slot names are displayed.

To use this subcommand, you must have CMC Login User privilege.

Synopsis

• racadm getslotname

• racadm getslotname [-i <slotNum> | -h]

• racadm getslotname -h

Input

• None -

Displays the slot name for all the four slots in the chassis.

• -i < slotNum > - specifies the slot number.

Values: 1 to 4

• -h - Specifies whether to display the slot name, iDRAC DNS name, or the host name (if available).

The values are:

○ 0 — Displays the slot name

○ 1 — Displays the host name instead of the slot name

○ 2 — Displays the iDRAC DNS name instead of the slot name

Example

• Display all slots names.

racadm getslotname

1 SLOT-01

2 Webserver01 WXP-8GRB221

3 Webserver3 WXP-319QWEecet5

4 SLOT-04

56 RACADM Subcommand Details