CLI Guide

Table 50. Chassis assigned WWN/MAC address
<Name> <Type> <Presence
>
<Active WWN/
MAC>>
<Partition
Status>>
<Assignment
Type>>
Server-4-A IDRAC-
Controller
Present F8:DB:88:3D:9F
:A7
N/A FlexAddress
10 GbE KR Present F8:DB:88:3D:9F
:A9
Disabled FlexAddress
10 GbE KR/3 Present F8:DB:88:3D:A2
:78
Unknown FlexAddress
10 GbE KR/3 Present F8:DB:88:3D:A2
:7B
N/A FlexAddress
NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.
Table 51. console assigned MAC/WWN of all LOMs or mezzanine cards
<Name> <Type> <Presence
>
<Active WWN/
MAC>>
<Partition
Status>>
<Assignment
Type>>
CMC N/A Present 34:17:EB:E6:E0
:24
N/A Factory
Server-1-A 10 GbE KR Not
Installed
10:98:36:AC:70
:EB
Not Installed Not Installed
Server-2 Not Installed Not
Present
Not Installed Not Installed Not Installed
Server-3-A Reserved Present
Switch-4 Not Installed Not
Present
Not Installed Not Installed Not Installed
Switch-1 Not Installed Not
Present
Not Installed N/A N/A
NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all
commands are run, the output is displayed as Not Installed in the following columns:
• <Presence>
• <NIC1 MAC Address>
• <NIC2 MAC Address>
RACADM Subcommand Details 47