CLI Guide

Table 40. Details of getled (continued)
<module> <LED state> server-1 ON
• racadm getled -m server-1
<module> <LED state> server-1 Extension(1)
getmacaddress
Table 41. Details of getmacaddress
Description Displays the MAC/WWN addresses for all modules or for a specified module.
The decoder values in the Type column indicate the protocols of the network cards.
• 0— Unsupported
• 1— ISCSI
• 2— FCoE-FIP
• 3— iSCSI/FCoE-FIP
To use this subcommand, you must have the CMC Login User privilege.
Synopsis • racadm getmacaddress
• racadm getmacaddress -m chassis
• racadm getmacaddress -m switch-<n>
• racadm getmacaddress [-m <module>] [-t iscsi] [-x]
• racadm getmacaddress [-a]
• racadm getmacaddress -c IO-Identity
• racadm getmacaddress -c Flexaddress
• racadm getmacaddress -c Factory
• racadm getmacaddress -c all
Input • -m < module > — Specifies the module whose MAC address you want to view.
< module > may be one of the following:
server-n , where n=1–4
switch-n , where n=1–2
• -t — Displays the iSCSI MAC addresses for all servers or the specified server if used with -m
option.
• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and
must be used with -m option.
• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine
cards. When FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN
address is displayed.
• -c— Displays the Ethernet, iSCSI, MAC/WWN, assignment type, and partition status of all LOMs
or mezzanine cards. Valid values for -c option are:
○ IO-Identity — Displays the user-defined MAC/WWN addresses.
○ FlexAddress — Displays the chassis assigned WWN/MAC addresses.
○ Factory — Displays the MAC/WWN addresses for all LOMs or mezzanine cards.
○ all — Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
Example
• Displays the NDC or LOM MAC address.
racadm getmacaddress
• Display iSCSI MAC addresses for all servers.
racadm getmacaddress -t iscsi
RACADM Subcommand Details
43