CLI Guide

Table 22. Firmware update methods (continued)

FW Update Method CMC

Local RACADM—TFTP

Local RACADM—FTP

Remote RACADM

Yes

Remote RACADM—TFTP

Yes

Remote RACADM—FTP

Yes

Firmware RACADM—TFTP

Yes

Firmware RACADM—FTP

Yes

get

Table 23. Details of get

Description

Saves CMC configuration properties or CMC Event Filter configurations to a file.

NOTE: If CMC is not in the network, you cannot export the chassis configuration profile

to a remote network share with proxy using the get command. But, you can export the

chassis configuration profile to the local management station.

Synopsis

racadm get -f <filename>

racadm -r <CMC IP> -u <username> -p <password> get -f <filename>

racadm -r <CMC IP> -u <username> -p <password> get -f <filename> -t

xml

racadm get -f <filename> -t xml -u <username> -p <password> -l <CIFS

share>

racadm get -f <filename> -t xml -l <NFS share>

Input

• –f: save event filter configurations to a file.

• -u: username of the remote share where the file must be exported.

• -p: password for the remote share where the file must be exported.

• -l: network share location where the file must be exported.

• -t: specify the file type that has to be exported. Valid value is “XML”.

• --clone: export the cloned configuration file. Only the XML file format is supported. The

configuration file can be exported to a local or remote share.

• --replace: export the replaced configuration file. Only XML file format is supported. The

configuration file can be exported to a local or remote share.

• --includeph: include password hash attributes

Example

• Export event filter configurations to a file by using remote racadm.

racadm -r 192.168.0.120 -u abc -p <password> get -f file.txt

RACADM Subcommand Details 33